Video Update: Transom fabrication

posted in: All, Interior, Video's | 0

Posted a new video on my Youtube channel

Transom fabricated from 3x8mm Okoume plywood.
The plans originally mentioned 18mm plywood, but I figured I would use a total of 24mm plywood strengthened with 600gr Tri-axial on the front and back side for additional strength.

First all plywood was saturated with epoxy.
Then I used thickened epoxy to glue the 3 panels together.
I finally covered the front and back with Tri-axial 600gr cloth.

Transom fabrication

Leave a Reply